Temperature sensor for EVMS3, BMS16 and BMS12


The dual temperature inputs on our BMS12 modules are designed to work with these 100Kohm NTC thermistors as temperature sensors. The EVMS3 and BMS16v2 now uses the same temperatures sensor. (Please note that this is not compatible the legacy EVMS Core or BMS16.)

They are about the size of a grain of rice so can easily be attached to cells or motors using a small amount of tape or silicon glue to hold them in place. The thermistors come with small flyleads as pictured which may need lengthening with extra wire depending on where the sensor is installed.

Temperature sensors may be ordered with a Molex Eurostyle connector for the EVMS3 and BMS12 V3, or a Molex C-Grid connector for earlier BMS12 modules.

Related Products

Electric Vehicle Management System V3   $235.00
Multifunctional, integrated control system for your electric vehicle or off-grid battery.

8-16 Cell Integrated Battery Management System   $240.00
Simple, reliable turn-key BMS for 24-48V lithium battery packs.

12-cell Lithium BMS Module   $145.00
Automotive grade, CAN bus-enabled battery management and balancing for up to 12 cells per module.


- Nominal resistance: 100Kohm at 25C
B25/100: 4540K
Tolerance: 1%


Zero Emission Vehicles Australia © 2024 :: Terms and Conditions, Privacy Policy, Payments and Delivery, Warranty and Returns